BioDoer™ PES Series Beverage Grade PES Pleated Filter Cartridges
BioDoer™ PES Series polyethersulfone pleated filter cartridges provide efficient submicronic retention in the production of foods and beverages. The highly asymmetric PES membrane gives excellent permeability, contaminant capac...
BioDoer™ PES Series polyethersulfone pleated filter cartridges provide efficient submicronic retention in the production of foods and beverages. The highly asymmetric PES membrane gives excellent permeability, contaminant capacity, and particle removal at high flow rates and low pressure drop. Excellent microbial retention with proven high LRV performance. Being hydrophilic, cartridges allow for fast and easy wetting in aqueous fluids. Cartridges are 100% integrity tested to assure optimized retention performance. Component materials comply with US FDA and EU regulations for safe use with food and potable water.
Features
Durable PES and polypropylene components
Extreme porosity highly asymmetric membrane
Excellent fluid compatibility
UPW rinse assures low extractables
Applications
Beer, wine, distilled spirits
Bottled water production
Food oils
Fruit juices
Product Quality
Individual elements are identified by serial number.
Produced in a clean-room environment for product purity & cleanliness.
Manufactured within an ISO 9001:2015 certified quality management system.
100% integrity tested by diffusion flow.
Meets USP Biological Reactivity Test requirements of the current USP <88> for Plastics Class VI-121°C.
A Certificate of Quality document is provided with each production lot.
Microbial Retention Performance
Rating
Microbial Retention
0.2μm
Brevundimonas diminuta (ATCC 19746), ＞6 LRV
0.45μm
Serratia marcescens (ATCC 14756), ＞5 LRV
0.65μm
Saccharomyces cerevisiae, ＞4 LRV
See Product Performance & Operating Guide for additional information, including integrity test parameters & methodology recommendations
Materials of Construction
Media:
Polyethersulfone
Support Layers:
Polypropylene
Cage/Core/End Caps:
Polypropylene
Adapter Reinforcement:
Polysulfone or Stainless Steel
Seal Options:
Silicone, NBR, EPDM, FKM, E-FKM
Dimensions
Diameter:
69mm (2.72")
Lengths:
10”, 20”, 30”, 40”
Operating Conditions
Operating Temperature:
80°C (176°F) max.
Operating dP (max.):
4 bar (58 psi) @ 20°C (68°F),2 bar (29 psi) @ 80°C (176°F)
Change-Out dP:
2.6 bar (38 psi) @ 20°C (68°F)
Sterilization Recommendations
Autoclave
125°C (257°F), 30 minutes, 30 cycles
Steam-in-Place (SIP):
125°C (257°F), 30 minutes, 30 cycles
Extractables, typical
Per 10” element:
﹤25mg non-dissolved solids
Clean Pressure Drop
Effluent Quality
Non-fiber releasing; Non-pyrogenic
Effluent meets USP Purified Water requirements for TOC, pH, and water conductivity
